Components SATCO in the 19” version

 

1. Channel Receiver Module SC-RSS-201/19

Channel Receiver Module serves for satellite or microwave relay link FM TV signals reception. It contains the SC-RSS-201 unit in the DS-LX version. i.e. with a dual stereo audio demodulator.

It is possible to complete it with following accessories.
REG - Output video and audio level control asymmetric
XLR - Symmetric audio output XLR 600 Ohm with level control
DO - Remote control accessories

2. Dual Channel Receiver Module SC-RSS/RSS-201/19

Dual Channel Receiver Module serves for satellite or microwave relay link FM TV signals reception. It contains two SC-RSS-201 modules in the version ST-LX i.e. with a single stereo audio demodulator. No accessories can be added.

3. Stereophonic TV modulator SC-STM-208/19

It is VSB AM TV modulator with an output to any TV channel or I.F. frequency according to the technical conditions for SC-STM-208. In the version with the TV channel output it can be completed with additional accessories:

REG - Input audio level control asymmetric
XLR - Symmetric audio input XLR 600 Ohm with level control
DO - Remote control accessories
EXT - External synchronizing frequency input
VIF - Video filter with a group delay corrector

In the MF and MF2 with an output on I.F. frequency versions it can be complemented with following accessories:
REG -Input audio level asymmetric control and output I.F. level control
XLR - Symmetric audio input XLR 600 Ohm with level control and Output I.F. level control
DO - Remote control accessories
EXT - External synchronizing frequency input
VIF - Video filter with a group delay corrector

4. SC-MTM-202/19 Monophonic TV modulator

Monophonic VSB AM TV modulator with an output to any TV channel or I.F. frequency according to technical conditions for SC-STM-208. Output level control is the standard feature in the TV channel modification.

It can be completed with additional accessories in case of the TV channel output:
REG - Input audio level control asymmetric
XLR - Symmetric audio input XLR 600 Ohm with level control
DO - Remote control accessories
EXT - External synchronising frequency input
VIF - Video filter with a group delay corrector

In the MF and MF2 versions with an output on I.F. frequency following accessories can be added:
REG - Input audio level control asymmetric and output I.F. level control
XLR - Symmetric audio input XLR 600 Ohm with input L.F. level control and output I.F. level control
DO - Remote control accessories
EXT - External synchronizing frequency input
VIF - Video filter with a group delay corrector

5. SC-IC/OC-101/19 Frequency converter

An input output part of the frequency converter. A SAW filter is added to the input part. There is also a H.F. level control. No additional accessories can be added.

6. SC-IC-101/AV/19 Input TV converter with AV output

An input part of a TV converter with a video and audio signal demodulator. i.e. with an AV output. A SAW filter is added and there are also a video filter with a group delay corrector and 5.5 MHz and 5.74 MHz trap circuits. I.F. frequency is also at the output

Following accessories can be complemented:
STEREO - Stereophonic decoder with MONO, STEREO, DUO identification
REG - Output video and audio level control asymmetric
XLR - Symmetric audio input XLR 600 Ohm with output audio and video and video level control

7. Input TV Converter SC-IC-101/19

An input part of a TV converter. It is equipped with an additional SAW filter. I.F. frequency is also at the output. No accessories can be added.

8. Output TV Converter SC-OC-101/19

An output part of a TV converter. I.F. frequency is also at the output. It is equipped with output level control. No accessories can be added.

9. Band UHF Amplifier SC-FMA-101/19

A UHF band amplifier for band frequency amplification within range from 87.5 to 108.0 MHz. No accessories can be added.

10. Dual channel UHF Converter SC-FMC/FMC-101/19

There are two identical modules SC-FMC-101 built in. It serves for channel FM signals of ground based transmitters processing from the range 87.5 MHz to 108 MHz (66 to 73 MHz) into the output frequency range 87.5 to 108 MHz. No accessories can be added.

11. Satellite broadcast demodulator and stereo FM modulator SC-ASR/SFM-101/19

It contains a demodulator of analog stereophonic satellite broadcast SC-ASR-206 and a frequency modulator SC-SFM-101 with an output frequency within range 87.5 to 108 MHz. H.F. output level control is the standard feature.

Following accessories can be complemented in case of using SC-SFM-101 separately:
REG - Input audio level control asymmetric
XLR - Symmetric audio input XLR 600 Ohm with input level control

12. Satellite Broadcasting Demodulator and Stereo FM Modulator SC-RSS/ASR-201/19

It contains Channel Receiver SC-RSS-201 for satellite or microwave relay link FM TV signals reception serving for video signal demodulation and Analog Stereophonic Satellite Broadcasting Signal Demodulator SC-ASR-206.

Following accessories can be complemented:
DO - Remote control
REG - Output video and audio level control asymmetric
XLR - Symmetric audio output XLR 600 Ohm with output audio and video level control

13. Dual Satellite Broadcasting Demodulator SC-2ASR-206/19

It is composed of two identical Analog Stereophonic Satellite Broadcasting Demodulators SC-ASR-206.Following accessories can be added:

REG - Output video and audio level control asymmetric
XLR - Symmetric audio output XLR 600 Ohm with Output audio level control

14. Signal Switch SC-SSW-101/19 version 2V

The four-channel signal switch version 2V is intended for automatic or manual switching of audio and video modulating signals. Single sections or switches can be grouped. No accessories can be added

15. Central Control Module SC-CCU-101/19

In the 19” version, the central control module with simple software serves to connect individual modules equipped on demand with PC serial remote control. More attractive MS Windows user software is supplied upon a special order.

It is possible to add following accessories:
SW CCU CCU software for MS Windows

16. Dual Audio Modulator SC-2AFM-101/19

It contains two identical modulators SC-AFM-101 of analog stereophonic satellite broadcasting. They serve as a source of a F.M. signal in frequency range 5.5-9.0 MHz (0.5 - 5.5 MHz) It serves especially with SC-TFM-101/19 VIDEO as a source of F.M. signals for L.F. signal transmission over microwave relay links.

Following accessories can be added:
REG - Input audio level control asymmetric
XLR - Symmetric audio input XLR 600 Ohm with audio level control

17. Frequency TV Modulator SC-TFM-101/19

It modulates video and single channel audio signals for a microwave relay link. The modulation is carried out for video signal and its accompanying L.F. audio signal on subcarrier 6.5MHz (7.0MHz etc) to an output I.F. frequency either 480 MHz as standard or any other channel with bandwidth 27 MHz in the range 424 - 564 MHz.

Following accessories can be added:
REG - Input audio level control asymmetric
XLR - Symmetric audio input XLR 600 Ohm with audio level control

other versions:
SC-TFM-101/STR/19 two audio subcarriers 6.5/7.0 ( or 7.5/8.0 MHz) without VIDEO modulation
SC-TFM-101/STRA/19 two audio subcarriers 1.6/2.0 ( or 2.4/2.8 MHz) without VIDEO modulation
SC-TFM-101/VIDEO/19 only a video signal modulator for connection with SC-2AFM-101/19

18. Frequency TV Modulator and Demodulator SC-RSS-/TFM-101/DT/19

A frequency modulator of data signal on the main carrier with the rate up to 8.0 Mb and on the secondary (formerly audio ) subcarrier up to rate 64 kb with an output on the I.F. frequency 480 MHz or on another channel with bandwidth 27 MHz in the range 424-564 MHz. There are also a demodulator of these signals (input frequency in the range 0.9 - 2.9 GHz) and a diplexer. There are no accessories.

19. Active Signal Branching Unit SC-SD8-216/19

The device serves for signal amplification and branching in the range 0.9- 2.0 GHz from an external unit (LNB) into 8 outputs. It contains a a fused power supply of the external unit. There are no accessories.

20. Source of External Reference Frequency SC-REF-217/19

The source of reference frequency 8.0 MHz for SC-STM-208/19 or SC-MTM-202/19 with EXT accessories. It contains distribution amplifiers for up to 28 outputs.
Other modifications:

6.4 MHz - reference frequency 6.4 MHz
4.0 MHz - reference frequency 4.0 MHz

21. Simple Power Supply 1NZS 155/...A/19

The device contains one power supply (3.2A or 4.5A) mounted in the 19” rack. No accessories can be added.

22. Dual Power Supply 2NZS 155/...A/19

The device contains two independent power supplies NZS 155 (3,2A or 4,5A) mounted in the 19” rack. No accessories can be added.